Home
RECALLS
WASHERS
Washer Help
DRYERS
Dryer Help
DISHWASHERS
Dishwasher Help
COOKERS
Cooker Help
MICROWAVES
Oven Help
REFRIGERATOR
Refrigerator Help
COFFEE MAKERS
VACUUM CLEANERS
Vacuum Help
AIR CONDITIONING
Small Appliances
Appliance Help
TOASTER OVENS
Waste Disposers
Trash Compactor
Outdoor Kitchen
KITCHEN FANS
ICE MAKERS
Home Robots
TOASTERS
WAFFLES
Home Electronics
Home Security
Used Appliances
Appliance BLOG
SEARS
Appliance BLOG
PARTNERS
 

Kitchen Aid Dishwasher Parts



KITCHEN AID DISHWASHER PARTS and REPAIR ADVICE

1. Always check that the power is on. The unit power indicator light will show this.

2. The door is not closed properly. If the door interlock switch is not activated nothing will work. Open and close the door and to make sure

3. The start switch hasn’t been pressed or turned.

4. You have not selected your dryer program

5. The cycle timer or program circuit board may be faulty

KITCHEN-AID DISHWASHER PARTS and REPAIR ADVICE - The machine does not wash properly

1. The inlet water line is clogged and the filter or screen if installed is clogged with sediment

2. The inlet water solenoid valve is faulty or not lifting properly.

3. The drain valve is jammed and is leaking or fouled with debris.

4 The water temperature is not coming up to the right value and this may be due to faulty thermostat or heating elements

5. The washing detergent dosing system is not functioning properly.

6. The cycle timer or program circuit board may be faulty

KITCHEN-AID DISHWASHER PARTS and REPAIR ADVICE - The machine has no water supply

1. The inlet water line is clogged and the filter or screen if installed is clogged with sediment

2. The inlet water solenoid valve is faulty or not lifting properly

3. The water level sensor or float switch is malfunctioning

4. The water overflow valve is jammed

KITCHEN AID DISHWASHER PARTS and REPAIR ADVICE - The machine will not drain down

1. The water drain pipe is clogged or fouled, this is usually at the bends in the piping.

2. The drain pump is faulty or fouled.

3. The drain valve is seized or has failed.

4. If the pump uses a drive belt this may have stretched or broken

5. The drive motor may have seized up or failed

6. The cycle timer or program circuit board may be faulty

KITCHEN AID DISHWASHER PARTS and REPAIR ADVICE - The drying cycle is not working normally

1. The thermostat or the heating element is faulty. If the heating element has failed the circuit breaker will usually trip or fuse blow.

2. The drying fan if installed may be faulty

Kitchen Aid Dishwasher Parts